To define the Transfer quantity, the number can be adjusted either by manual input or by the arrow icons (see Figure 1). Changes are automatically applied when the focus is set on any other field.
Figure 1 - Transfer quantity
The transfer quantity defines the number of (individual) products that are packed into a carrier.
On the simulation side, it is important to note that only order-only carriers are formed, i.e. if the order size is smaller than the transfer quantity or in the case of partially filled carriers at the end of an order, the transfer quantity per load carrier can be undercut.
Figure 2 - Transfer quantity
© SimPlan AG - Hanau District Court, Commercial Register (Part B) 6845 - info@simplan.de - www.simplan.de/en